商品概要
JAN:4539770000676
STDより20mmローダウンします。
ピポット部とガソリンタンクの干渉を防ぐ為、
リアショックの全長をロング仕様にして下さい。
メインパイプ:80mmx40mm/目の字断面
STDマフラー使用不可
センタースタンド使用可能。(センタースタンドストッパー必要)
35ｍｍロング(ロングドライブシャフト付属)
To achieve a 20mm lowering compared to STD, please make the rear shock in a long version to prevent interference between the pivot area and the fuel tank.
Main pipe: 80mm x 40mm with an eye-shaped cross-section
Not compatible with STD mufflers
Can be used with a center stand (center stand stopper required)
Includes a 35mm long drive shaft (long drive shaft included)
Product Description: The universal joint case is also machined from a single piece, ensuring durability and allowing for secure attachment to the chassis from both left and right pivot mounts.
This design maintains the rigid shaft drive system, a distinctive feature of the V-MAX.
It is a simple bolt-on process using the STD gear case.
All mounting points, including the pivot area, have been precisely machined for optimal fitment.
The installation requires the use of the STD axle shaft.
The impressive form of the pipe measures 80mm x 40mm, providing a strong and rigid structure with its eye-shaped cross-section design.
商品説明
ユニバーサルジョイントケース部分も削り出しのワンピース構造。ピポットマウントの左右からの締め付けトルクに耐え、且つがっちり車体に固定できます。
V-MAXの特徴でもあるシャフトドライブのままで剛性UP。STDのギヤケースをボルトオンするだけです。
ピポット部を含め全ての取付部には機械により後加工を施してあります。取付には、STDアクスルシャフトを使用します。
80mm×40mmの迫力あるフォルム。目の字断面構造による高剛性パイプを使用。
The universal joint case is also machined from a single piece, ensuring durability and allowing for secure attachment to the chassis from both left and right pivot mounts.
This design maintains the rigid shaft drive system, a distinctive feature of the V-MAX.
It is a simple bolt-on process using the STD gear case.
All mounting points, including the pivot area, have been precisely machined for optimal fitment.
The installation requires the use of the STD axle shaft.
The impressive form of the pipe measures 80mm x 40mm, providing a strong and rigid structure with its eye-shaped cross-section design.
V-MAXの特徴でもあるシャフトドライブのままで剛性UP。STDのギヤケースをボルトオンするだけです。
ピポット部を含め全ての取付部には機械により後加工を施してあります。取付には、STDアクスルシャフトを使用します。
80mm×40mmの迫力あるフォルム。目の字断面構造による高剛性パイプを使用。
The universal joint case is also machined from a single piece, ensuring durability and allowing for secure attachment to the chassis from both left and right pivot mounts.
This design maintains the rigid shaft drive system, a distinctive feature of the V-MAX.
It is a simple bolt-on process using the STD gear case.
All mounting points, including the pivot area, have been precisely machined for optimal fitment.
The installation requires the use of the STD axle shaft.
The impressive form of the pipe measures 80mm x 40mm, providing a strong and rigid structure with its eye-shaped cross-section design.